InfoCoBuild

Manufacturing Process II

Manufacturing Process II. Instructors: Prof. A. B. Chattopadhyay and Prof. S. Paul, Department of Mechanical Engineering, IIT Kharagpur. This course covers lessons in tool geometry, mechanism of chip formation, orthogonal and oblique cutting, cutting temperature, control of cutting temperature and cutting fluid application, advanced tool materials, abrasive process, gear manufacturing, electro chemical machining, electro discharge machining, electron beam machining and laser beam machining. (from nptel.ac.in)

Lecture 24 - Forces Developing and Acting in Machine Tools

Go to the Course Home or watch other lectures:

Classification of Metal Removal Processes and Machine Tools

Lecture 01 - Instructional Objectives

Lecture 02 - Instructional Objectives: The Working Principles of Machine Tools

Mechanics of Machining

Lecture 03 - On Tool Geometry

Lecture 04 - Interrelations among the Tool Angles Expressed in Different Systems

Lecture 05 - Mechanism of Chip Formation

Lecture 06 - Orthogonal and Oblique Cutting under Mechanism of Machining

Lecture 07 - Use of Chip Breaker in Machining

Lecture 08 - Machining Forces and Merchant's Circle Diagram

Lecture 09 - Analytical and Experimental Determination of Cutting Forces

Lecture 10 - Dynamometers for Measuring Cutting Forces

Lecture 11 - Cutting Temperature - Causes, Effects, Assessment and Control

Lecture 12 - Control of Cutting Temperature and Cutting Fluid Application

Machinability

Lecture 13 - Concept of Machinability and its Improvement

Lecture 14 - Failure of Cutting Tools and Tool Life

Lecture 15 - Conventional Cutting Tool Materials

Lecture 16 - Advanced Cutting Tool Materials

General Purpose Machine Tools

Lecture 17 - Kinematic System of Centre Lathe and its Operations

Lecture 18 - Kinematic Systems and Operations of Drilling Machines

Lecture 19 - Kinematic Systems and Operations of Milling Machines

Lecture 20 - Configuration, Kinematic System, Working Principle and Applications of Shaping Planing and Slotting Machines

Lecture 21 - Mounting of Jobs and Cutting Tools in Machine Tools

Lecture 22 - Mounting of Jobs and Cutting Tools in Machine Tools (cont.)

Lecture 23 - Construction, Operation and Tool Layout of Semiautomatic and Automatic Lathes

Lecture 23b - Use of Various Attachments used in Machine Tools

Lecture 24 - Forces Developing and Acting in Machine Tools

Lecture 25 - Estimation of Machining Time

Lecture 26 - Broaching - Principles, Systems and Applications

Abrasive Processes (Grinding)

Lecture 27 - Basic Principle, Purpose and Applications of Grinding

Lecture 28 - Abrasive Processes

Lecture 29 - Abrasive Process (Grinding)

Superfinishing Processes

Lecture 30 - Honing, Lapping and Superfinishing

Manufacturing of Screw Threads and Gears

Lecture 31 - Production of Screw Threads by Machining, Rolling and Grinding

Lecture 32 - Gear Manufacturing

Jigs and Fixtures for Machine Shops

Lecture 33 - Jigs and Fixtures for Machine Shops

Lecture 34 - Design and Applications of Jigs and Fixtures

Non-traditional Manufacturing

Lecture 35 - Non-traditional Manufacturing Introduction and Abrasive Jet Machining

Lecture 36 - Ultrasonic Machining

Lecture 37 - Water Jet Machining and Abrasive water Jet Machining

Lecture 38 - Electrochemical Machining

Lecture 39 - Electro-discharge Machining

Lecture 40 - Electron Beam Machining and Laser Beam Machining