Design for Internet of Things (Prof. T. V. Prabhakar, IISc Bangalore) | Electronics and Electrical Engineering

Design for Internet of Things

Design for Internet of Things. Instructor: Prof. T. V. Prabhakar, Department of Electronic Systems Engineering, IISc Bangalore. A high level view of Internet of Things, design of smart objects that provide collaboration and ubiquitous services will be explored. Design for longevity/energy efficiency will be highlighted. Step by step system design will be introduced. Small video clips that will allow students to prototype will be displayed. At the end of the course, the student is expected to make the right choice of hardware, software and protocols for the proposed application. (from nptel.ac.in)

Introduction to IoTs

Introduction to IoTs - Improving Quality

Lecture 01 - Introduction to IoTs, Part I

Lecture 02 - Introduction to IoTs, Part II

Lecture 03 - Introduction to IoTs: Examples

Lecture 04 - IoT Applications I

Lecture 05 - IoT Applications II

Power Block of an IoT Device

Lecture 06 - Power Management in IoT Device

Lecture 07 - Introduction to LDO (Low Dropout Regulator)

Lecture 08 - Design with an LDO

Lecture 09 - Introduction to Switching Regulators

Designing with LDOs, Switching Regulators and Case Studies

Lecture 10 - Designing with LDOs, Switching Regulators and Case Studies, Part I

Lecture 11 - Designing with LDOs, Switching Regulators and Case Studies, Part II

Lecture 12 - Designing with LDOs, Switching Regulators and Case Studies, Part III

Lecture 13 - Designing with LDOs, Switching Regulators and Case Studies, Part IV

Power Conditioning with Energy Harvesters

Lecture 14 - Power Conditioning with Energy Harvesters, Part I

Lecture 15 - Power Conditioning with Energy Harvesters, Part II

Lecture 16 - Power Conditioning with Energy Harvesters, Part III

Batteryless Power Supply and Battery Life Calculation for Embedded Devices

Lecture 17 - Batteryless Power Supply and Battery Life Calculation for Embedded Devices, Part I

Lecture 18 - Batteryless Power Supply and Battery Life Calculation for Embedded Devices, Part II

Lecture 19 - Batteryless Power Supply and Battery Life Calculation for Embedded Devices, Part III

IoT Protocols

Lecture 20 - Introduction to MQTT (Message Queuing Telemetry Transport)

Lecture 21 - Quality of Service in MQTT

Lecture 22 - Standards and Security in MQTT

Lecture 23 - Introduction and Implementation of AMQP (Advanced Message Queuing Protocol)

Lecture 24 - Implementation of CoAP (Constrained Application Protocol) and Multicast DNS

IoT LAN and WAN Connectivities

Lecture 25 - Basics of RFID

Lecture 26 - RFID Protocol and Applications

Lecture 27 - BLE (Bluetooth Low Energy) Security

Lecture 28 - LPWAN (Low-Power Wide-Area-Network) Technologies

Choice of Microcontrollers and IoT Case Studies

Lecture 29 - Choice of Microcontrollers

Lecture 30 - Case Study 1 - Joule Jotter

Lecture 31 - Case Study 2 - Cloud Based Systems

References

Design for Internet of Things
Instructor: Prof. T. V. Prabhakar, Department of Electronic Systems Engineering, IISc Bangalore. A high level view of Internet of Things, design of smart objects that provide collaboration and ubiquitous services will be explored.